3pdt wiring board
Adjust your soldering iron to about 800 degree Fahrenheit
We recommed this soldering tip:
Stick the PCB to the pins of the 3pdt switch and fix the switch before solderig
Put the soldering tip to one side and add solder from the other side. Don't contact the pins with the soldering tip longer then 2-3 seconds ! After a pin is soldered keep 30-60 seconds pause to let the switch cool off.
Solder wires to the pins. For a 1590B enclosure we recommend wire length of 6-7cm. Optional place for LED and LED resistor is on the PCB.
DC and IN/OUT jacks soldered to the PCB:
Contact the 3pdt switch PCB with the main PCB:
Optional you can wire battery clips through this holes on the PCB.